Search Jobs
Contract: Senior Well Site Leader (SWSL) - Rig / Iraq
This job has expired or may no longer be taking applications, but other similar jobs are available.
Added: | 2021-11-17 |
Location: | Basrah, Iraq |
Salary: | TBC |
Duration: | Contract |
Apjid | 3 |
Role Synopsis
Appendix 1: Senior Well Site Leader Job Detailed Description and Expectations
Description:
Expectations:
- This role will cover both drilling and workover operations as operational requirements dictate.
- The SWSL reports to Drilling Team Leader, who in turn reports to the Drilling Manager.
- The SWSL is responsible for the implementation of the drilling or workover programme.
- The role of the SWSL is to ensure that HSE goals, Operational Integrity, Standards and Well Objectives are not compromised during well operations.
- Mentoring of staff is a key role.
- Active HSE Leadership
- Active monitoring and directing of operations including but not limited to HSE; well control; planning and preparation of upcoming operations; issuing of clear instructions to the rig contractor based on the requirements laid down in the Standards, the drilling programme, discussions with the office and indications from the well; communication with various contractors on and off site; observing, interpreting, understanding and reacting to changes in downhole trends; adequate reporting; good oilfield practices etc.
- The SWSL will provide mentoring and support to the development of Iraqi staff.
- Monitor service providers through formal audit and inspections to promote good HSE & oil field practice
- 15 + years’ drilling and workover experience, at least 5 years as SWSL
- Proficient in safe working practices and good oil field practices
- Proven ability to lead drilling and workover operations through a theoretical and practical approach.
- Ability to understand and work with differing cultures
- Valid Well Control certification, as per Standards (Level 4 Surface)
- Proven Leadership (HSE and Operational) and Mentoring qualities
Appendix 1: Senior Well Site Leader Job Detailed Description and Expectations
Description:
- This job will be a combination of day-rate and turnkey operations working an equal time rotation, predominantly rig based.
- The workover operations will be predominantly tubing change out, ESP operations and well integrity repairs.
- The new drill wells will be vertical, directional S and J shaped with varying step outs, and high angle to horizontal with varying step outs
- Must possess valid well control certificate (IWCF or IADC surface stack supervisor)
- Must have good English verbal, written, and listening skills
- Must be able to work effectively as part of a team
- Must be able to work on own initiative; use proactive approach to problem solving and avoidance
- Pad-drilling experience would be an asset
- ESP experience would be an asset.
Expectations:
- Must drill wells in a safe, efficient, and effective manner
- Must be able to take responsibility and manage tasks through to completion
- Must adhere to a rigid code of conduct and respect diverse cultural backgrounds and religious beliefs
- Must mentor/coach organisation or drilling contractor staff to follow API and oilfield best practices
- Must review / audit at least one JSA and PTW on a daily basis and ensure that TBTs are actually taking place and, more importantly, are participated in/understood.
- Must get engaged in incident investigations.
- Must review SOPs for suitability / completeness and identify gaps and work with various entities to improve organisation/drilling contractor operations
- Must lead after-action and lessons-learned reviews per hole section to quickly communicate improvement opportunities to the Drilling Engineer
- Must conduct well control (and other) audits
- Must review and close out write-ups on the Corrective-Action Registers (CARs) on the rig while implementing a continuous-improvement program
- Must participate in pre-tour and critical pre-job safety meetings
- Must review and follow / implement the agreed-upon drilling program, verifying that approved operational steps are adhered to and promulgated in appropriate plans forward
- Must ensure an MoC is accomplished if operations need to deviate from the agreed-upon drilling program or SOP
- Must directly oversee operations that deviate from normal activities, such as tight hole / hole problems/flow checks / tripping off bottom/running casing / all cementing operations
- Must convey the HSE lessons learned (review incident reports) with assigned rig crews and personnel
- Must participate in ALL drills and offer post-drill constructive criticism, if necessary
- Must verify / witness BOP tests and ensure the BOP testing schedule is adhered to or dispensation is approved
- Must witness all operations involving equipment, such as wellhead installation and setting and recovering test plugs and wear bushings
- Must verify casing operations are happening in accordance with organisation/API standards
- Must verify/ensure all appropriate equipment, personnel, OCTG, supplies are ordered/called off in order to execute the drilling program in a timely, competent, coherent fashion
- Must review cementing programs and monitor/execute cementing operations (volumes pumped, densities, losses, returns, types and weights of spacers, placement/operation of DVs/MSIPCs)
- Must monitor and report ANY well-control event and be prepared to assume on-site senior representative responsibilities
- Must ensure morning reports are well written and accurate and that appropriate well data is input into Landmark OpenWells platform
- Must conduct morning, noon, and night walks around the rig and location looking for safety, environmental, and operational hazards; must intervene, if required
- Must participate in rig STOP card program or equivalent
- Must conduct periodic job observations and discuss with the rig managers how to correct errant behaviors
- Must ensure rig leadership meetings are occurring on a daily basis and that valid issues/concerns are actioned or addressed
- Must perform operator field authorizations and approvals for all contracted work, as required
- Must possess valid well control certificate (IWCF or IADC surface stack supervisor)
- Must be able to work effectively as part of a team
- Must be able to work on own initiative; use proactive approach to problem solving and avoidance
- Must use initiative to ensure issues are overcome.
- Must have a patient and calm personality
How to Apply
© All rights reserved, 2001 - 2024